PRODUCTS
-
Ventilated membrane
-
Waterproof and breathable valve
-
Plasctic vent assembled by sleeve
-
plasctic vent assembled by hand
-
Plasctic vent assembled by Buckle
-
Plastic vents assembed by twist
-
Plastic vent assembled by rubber
-
Plastic vent assembled by insert
-
Plastic vent assembled by direct insert
-
Metal vent by sleeve
-
Metal vent assmebled by screw-driver
-
Metal vent assmebled by sleeve
-
-
Sound Transparent membrane
-
Special function waterproof and breathable valve
-
Accessory
The main accessories including the nut, the base and the seals, etc.
Nut | There are a different thread model and different material nut which match with diffrent vent. |
Base | On the soft equipment surface installation, need to have a base for fixed installation such as surfboard. |
seal part | We have the O-ring and flat- ring shape,and the material NBR |
nut | plastic series | M12*1.5 | gray | ||
M12*1.5 | white | ||||
M12*1.5 | |||||
Metal series | M5*0.8 | Cu | white | ||
steel |
natural |
||||
M12*1.5 | Cu |
natural |
|||
steel |
natural |
||||
Surf vent base | cup-shape | M12*1.25 | nylon PA66 | black | |
M12*1.25 | nylon PA66 | white | |||
M12*1.25 | POM | white | |||
Cylinder-shape | M12*1.25 | nylon PA66 | black | ||
M12*1.25 | nylon PA66 | white | |||
seal ring |
O-ring |
18*13*2.5 | sillicon | white | |
14*9*2.5 | sillicon | white | |||
红色 | |||||
black | |||||
12*8*2 | sillicon | white | |||
11*5*3 |
NBR |
black | |||
11*6*2.5 | sillicon | white | |||
10*5*2.5 | HNBR | black | |||
9*5*2 | sillicon | black | |||
8*2.0 | sillicon | white | |||
8*4*2.0 | sillicon | black | |||
8*5*1.5 | sillicon | white | |||
8*5*1.5 | sillicon | 红色 | |||
6.6*3*1.8 | sillicon | white | |||
5*3*1 | sillicon | white |
|
||
Flat-ring | 14.5*9.5*2.0 | HNBR | black | DPH-0ZH-151020-H00000-0 | |
12*4.4*2.0 | sillicon | white | DPS-0JX-124420-B00000-0 | ||
12*7*0.5 | sillicon | gray | DPS-0LQ-120705-L00000-0 | ||
10*5*0.5 | sillicon | gray | DPS-0LQ-120705-L00000-0 | ||
7.7*3.7*0.7 | sillicon | white | DPS-0JX-773707-B00000-0 |
Mounting nut instructions
1, if the customer need to increase the gasket in the nut, only to allow add a pad.
2, strictly according to the specifications of the torque requirements tighten the nut, and does not allow additional sleeve wrench afterburner, so as not to be damaged fasteners or wring bolt.
3, using the corresponding socket or wrench installation
Base Installation instructions
1, using masking tape stick on bottom sealing (cup shape)
2, assemble the base on the user's products with adhesive
3, After dry solid
4, drill out the masking tape with drill within 8cm.
5, and then install the vent in the base
O - ring installation instructions
Press the OR-ring in to the root of the screw tooth .the ring can not be twisted
HUIZHOU LEADER ELECTRONIC SCIENCE&TECHNOLOGY CO., LTD.
Service Hotline:400-080-1865
TEL:0752-2601855
FAX:0752-2601865
E-mail:sales@hzlede.com
Address:No. 180 Shenwu Group, Fourth Ring South Road, Henan Bank, Huicheng District, Huizhou
Copyright © ALL RIGHTS RESERVED HUIZHOU LEADER ELECTRONIC SCIENCE&TECHNOLOGY CO., LTD. 粤ICP备15115233号 www.hzlede.com www.300.cn