PRODUCTS
-
Ventilated membrane
-
Waterproof and breathable valve
-
Plasctic vent assembled by sleeve
-
plasctic vent assembled by hand
-
Plasctic vent assembled by Buckle
-
Plastic vents assembed by twist
-
Plastic vent assembled by rubber
-
Plastic vent assembled by insert
-
Plastic vent assembled by direct insert
-
Metal vent by sleeve
-
Metal vent assmebled by screw-driver
-
Metal vent assmebled by sleeve
-
-
Sound Transparent membrane
-
Special function waterproof and breathable valve
-
Accessory
In real production, there are many vent that need metal materials to achieve a higher strength and longer life.
The metal slot mounting screw type vent , air respirator, commonly known as the screw, this product uses the joint development ePTFE membrane with our partner, the shell is made of brass, aluminum or stainless steel membrane and shell through overflow interference to match tightly together, with stable performance, simple installation and use a longer period of time, the good waterproof breathable performance.
Applicable to the sink hole position, or position could not installation by sleeve Good waterproof performance
Quick to leave the liquid surface
Groove design to ensure that the O loop does not overflow
Major benefits:
Dust and waterproof performance up to IP68
keep the pressure balance, avoid gas expansion to attack the shell ,prolong the life.
maintain moisture balance, discharge moisture, relieve fogging and condensation inside the shell shell parts, extend
component life
To prevent the the electronic corrosion caused by salt and water , the protection of sensitive electronic, inductive products
Reduce the cost of R & D, and reduce the difficulty of the research and development.
Reduce the production cost and reduce the production difficulty.
Reduce the cost of maintenance and repair
Waterproof and dust hydrophobic
Do not accumulate dust, do not water, do not form a dust cake, to maintain a smooth flow
Anti ultraviolet, long life
Wide operating temperature range
Easy installation and convenient maintenance.
At the same time, high quality flat mat, long life, no fracture, fatigue resistance.
- safe non-toxic, no thorns
Greatly reduce the after sales failure rate, reduce the project cost, solve the enterprise to worry .
Product installation guide
1.the installation location and the design of the installation hole
The location of the installation hole is preferred to choose the side vertical to the ground, vent level installation, followed by the installation of the bottom, avoid easily by rain, dust and other objects covered by the location. In order to avoid being covered with membrane blocking microporous.
2. the design of installation hole
LeaDer M12*1.5 series of products using size 14*9*2.5mm, hardness of 50 dgree O -ring, there are anti-overflow groove design.
Suggest typical installation hole with chamfering of 120 degrees, the diameter of 14.2mm.
Installation torque is suitable for 5 to 6.0kgf.cm.
LeaDer vent groove design is more convenient for users to screw holes chamfer design .
Within the specified torque range:
90 degree chamfer, from 12 to 14.6mm can be used.
120 degree chamfer, from 12 to 15.0mm can be used.
precautions before installation
according to the installed before the need to prepare the appropriate slot screwdriver, adjust the torque in the 5 to 6.0Kgf.cm.
Specific to match the installation of screw teeth and O type of ring size and hardness and adjust.
series | NO. | PART NO. | meterial | installation method | membrane model | characteristic | ventilation volumn | IP LEVEL | shape | cover | color | thread length | installation connector | charateristic | specification |
vent | ml/min@ 70mbar |
mm | mm | ||||||||||||
plastic vent installation by sleeve | 1 | LD-FNL-26MHD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Black | M12*1.25 | download spec. | ||
2 | plastic vent installation by sleeve | brass | thread | 26 | hydrophobic | 6250 | IP67 | 44on the edge haxagon | W | white | M40*1.5 | download spec. | |||
plastic vent installation by sleeve | 3 | LD-FNL-260L67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 4 | LD-FNL-260H67/G1/4 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 5 | LD-FNL-210H67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
metal vent installation by sleeve | 6 | LD-FCL-27WB67M4×0.7 | brass | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 7 | LD-FCL-27WBD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 8 | LD-FGL-27WHD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 9 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 10 | LD-FCL-26WB67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 11 | LD-FVL-26WV67/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
plastic vent installation by twist | 12 | LD-FNK-250L67/M10 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ10.0 | download spec. | ||
plastic vent installation by twist | 13 | LD-FNK-250L67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ6.4 | download spec. | ||
plastic vent installation by twist | 14 | LD-FNK-250H67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Black | Φ6.4 | download spec. | ||
plastic vent installation by direct insert | 15 | LD-FNN-26WB67/Φ7 | PA66 | twinst | 26 | hydrophobic | 60 | IP67 | hole circle 7mm polygon | W | white | Φ7 | download spec. | ||
plastic vent installation by direct insert | 16 | LD-FNZ-26WB67/Φ7 | PA66 | insert | 26 | hydrophobic | 60 | IP67 | hole diameter7circle | W | white | Φ7 | download spec. | ||
plastic vent installation by plug | 17 | LD-FSS-130H67Φ12.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 18 | LD-FSS-130H67Φ10.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 19 | LD-FSS-130H67Φ9.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by cap | 20 | LD-FSU-130H67/Φ8.5 | PU | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 21 | LD-FSS-130H67/Φ8.5 | TPV | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 22 | LD-FAM-22WH67/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by hand | 23 | LD-FNL-27WB67/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | Diameter12circle | W | white | M5*0.8 | download spec. | ||
plastic vent installation by cap | 24 | LD-FAM-22WHD7/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by sleeve | 25 | LD-FNL-26WHD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 11 on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 26 | LD-FNL-26WBD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10 on the edge haxagon | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 27 | LD-FNL-26WHC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 28 | LD-FNL-26WBC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 29 | LD-FNL-21WHD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 30 | LD-FNL-21WBD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 31 | LD-FNL-21WHZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 32 | LD-FNL-21WBZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 33 | LD-FNL-26MLD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Gray | M12*1.25 | download spec. | ||
plastic vent installation by sleeve | 34 | LD-FNL-260L67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 35 | LD-FNL-260H67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 36 | LD-FNL-260H67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 37 | LD-FNL-210L67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 38 | LD-FNL-210L67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 39 | LD-FNL-210L67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 40 | LD-FNL-210H67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 41 | LD-FNL-210H67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
metal vent installation byhand | 42 | LD-FCL-27WB67-N/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter18circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 43 | LD-FGL-22WG67M4×0.7 | stell | thread | 22 | hydrophobic | 70 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 44 | LD-FCL-27WG67M4×0.7 | stell | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 45 | LD-FGL-27WGD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 46 | LD-FCL-27WCD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | brass natral color | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 47 | LD-FCL-27WBD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 48 | LD-FCL-27WHD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 49 | LD-FCL-27WBD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 50 | LD-FGL-27WBD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 51 | LD-FGL-27WHD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 52 | LD-FGL-27WGD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 53 | LD-FCL-27WBD7/M12*1.0 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.0 | download spec. | ||
metal vent installation by sleeve | 54 | LD-FCL-27WBD7/M12*1.25 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 55 | LD-FCL-27WB67/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 56 | LD-FCL-27WHD7/M12X1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.75 | |||
metal vent installation by sleeve | 57 | LD-FCL-22WBD7/M12X1.75 | brass | thread | 22 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | |||
metal vent installation by sleeve | 58 | LD-FCL-27WB67/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 59 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 60 | LD-FGL-26WBD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. |
series | NO. | PART NO. | meterial | installation method | membrane model | characteristic | ventilation volumn | IP LEVEL | shape | cover | color | thread length | installation connector | charateristic | specification |
vent | ml/min@ 70mbar |
mm | mm | ||||||||||||
metal vent installation by sleeve | 61 | LD-FGL-26WGD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 62 | LD-FCL-26WBD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | white | download spec. | ||
metal vent installation by sleeve | 63 | LD-FCL-26WB67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 64 | LD-FCL-26WHD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 65 | LD-FCL-26WH67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 66 | LD-FCL-26WHD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 67 | LD-FCL-26WH67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 68 | LD-FCL-26WBD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 69 | LD-FVL-26WVD7/M10*1.0 | Al | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | Al natural color | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 70 | LD-FCL-26WBD7/M10*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.25 | download spec. | ||
metal vent installation by sleeve | 71 | LD-FCL-26WB67/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 72 | LD-FCL-26WBD7/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 73 | LD-FCL-33WBD7/M12*1.5 | brass | thread | 33 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 74 | LD-FCL-26WHD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 75 | LD-FGL-26WBD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 76 | LD-FGL-26WHD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 77 | LD-FGL-26WGD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 78 | LD-FCL-26WBD7/M12*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 79 | LD-FCL-26WBD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 80 | LD-FCL-26WHD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 81 | LD-FCL-26WBD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 82 | LD-FCL-26WB67/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 83 | LD-FCL-26WB67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 84 | LD-FCL-26WH67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 85 | LD-FCL-26WCD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 86 | LD-FCL-26WC67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 87 | LD-FVL-26WVD7/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 88 | LD-FVL-96WV65/M12*1.5 | Al | thread | 96 | hydrophobic | 6300 | IP65 | 17on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 89 | LD-FCL-26WBZ7/M16*2.0 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*2.0 | download spec. | ||
metal vent installation by sleeve | 90 | LD-FCL-26WCZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | brass natral color | M16*1.5 | download spec. | ||
metal vent installation by sleeve | 91 | LD-FCL-26WBZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 92 | LD-FNL-26WHC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 93 | LD-FNL-26WBC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 94 | LD-FNL-21WHD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 95 | LD-FNL-21WBD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 96 | LD-FNL-21WHZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 97 | LD-FNL-21WBZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 98 | LD-FNL-26MLD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Gray | M12*1.25 | download spec. | ||
plastic vent installation by sleeve | 99 | LD-FNL-26MHD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Black | M12*1.25 | download spec. | ||
100 | plastic vent installation by sleeve | brass | thread | 26 | hydrophobic | 6250 | IP67 | 44on the edge haxagon | W | white | M40*1.5 | download spec. | |||
plastic vent installation by sleeve | 101 | LD-FNL-260L67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 102 | LD-FNL-260L67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 103 | LD-FNL-260H67/G1/4 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 104 | LD-FNL-260H67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 105 | LD-FNL-260H67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 106 | LD-FNL-210L67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 107 | LD-FNL-210L67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 108 | LD-FNL-210L67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 109 | LD-FNL-210H67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 110 | LD-FNL-210H67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 111 | LD-FNL-210H67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
metal vent installation byhand | 112 | LD-FCL-27WB67-N/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter18circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 113 | LD-FGL-22WG67M4×0.7 | stell | thread | 22 | hydrophobic | 70 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 114 | LD-FCL-27WB67M4×0.7 | brass | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 115 | LD-FCL-27WG67M4×0.7 | stell | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 116 | LD-FCL-27WBD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 117 | LD-FGL-27WHD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 118 | LD-FGL-27WGD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 119 | LD-FCL-27WCD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | brass natral color | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 120 | LD-FCL-27WBD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 121 | LD-FCL-27WHD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 122 | LD-FCL-27WBD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 123 | LD-FGL-27WBD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 124 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 125 | LD-FGL-27WHD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 126 | LD-FGL-27WGD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 127 | LD-FCL-27WBD7/M12*1.0 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.0 | download spec. | ||
metal vent installation by sleeve | 128 | LD-FCL-27WBD7/M12*1.25 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 129 | LD-FCL-27WB67/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 130 | LD-FCL-27WHD7/M12X1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.75 | |||
metal vent installation by sleeve | 131 | LD-FCL-22WBD7/M12X1.75 | brass | thread | 22 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | |||
metal vent installation by sleeve | 132 | LD-FCL-27WB67/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 133 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 134 | LD-FGL-26WBD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 135 | LD-FGL-26WGD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 136 | LD-FCL-26WBD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | white | download spec. | ||
metal vent installation by sleeve | 137 | LD-FCL-26WB67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 138 | LD-FCL-26WHD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 139 | LD-FCL-26WH67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 140 | LD-FCL-26WHD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 141 | LD-FCL-26WHD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 142 | LD-FCL-26WH67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 143 | LD-FCL-26WB67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 144 | LD-FCL-26WBD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 145 | LD-FVL-26WVD7/M10*1.0 | Al | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | Al natural color | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 146 | LD-FCL-26WBD7/M10*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.25 | download spec. | ||
metal vent installation by sleeve | 147 | LD-FCL-26WB67/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 148 | LD-FCL-26WBD7/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 149 | LD-FCL-26WBD7/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 150 | LD-FCL-33WBD7/M12*1.5 | brass | thread | 33 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 151 | LD-FCL-26WHD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 152 | LD-FGL-26WBD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 153 | LD-FGL-26WHD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 154 | LD-FGL-26WGD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 155 | LD-FCL-26WBD7/M12*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 156 | LD-FCL-26WBD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 157 | LD-FCL-26WHD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 158 | LD-FCL-26WBD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 159 | LD-FCL-26WB67/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 160 | LD-FCL-26WB67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 161 | LD-FCL-26WH67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 162 | LD-FCL-26WCD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 163 | LD-FCL-26WC67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 164 | LD-FVL-26WV67/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 165 | LD-FVL-26WVD7/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 166 | LD-FVL-96WV65/M12*1.5 | Al | thread | 96 | hydrophobic | 6300 | IP65 | 17on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 167 | LD-FCL-26WBZ7/M16*2.0 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*2.0 | download spec. | ||
metal vent installation by sleeve | 168 | LD-FCL-26WCZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | brass natral color | M16*1.5 | download spec. | ||
metal vent installation by sleeve | 169 | LD-FCL-26WBZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*1.5 | download spec. | ||
metal vent installation by sleeve | 170 | LD-FCL-26WBZ7/M20*1.5 | brass | thread | 26 | hydrophobic | 2150 | IP67 | 22on the edge haxagon | W | white | M20*1.5 | download spec. | ||
metal vent installation by sleeve | 171 | LD-FCL-26WBZ7/M32*1.5 | brass | thread | 26 | hydrophobic | 6250 | IP67 | 36on the edge haxagon | W | white | M32*1.5 | download spec. | ||
metal vent installation by sleeve | 172 | LD-FCL-26WBD7/M40*1.5 | brass | thread | 26 | hydrophobic | 8250 | IP67 | 44on the edge haxagon | W | white | M40*1.5 | download spec. | ||
plastic vent installation by twist | 173 | LD-FNK-250L67/M10 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ10.0 | download spec. | ||
plastic vent installation by twist | 174 | LD-FNK-250L67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ6.4 | download spec. | ||
plastic vent installation by twist | 175 | LD-FNK-250H67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Black | Φ6.4 | download spec. | ||
plastic vent installation by direct insert | 176 | LD-FNN-26WB67/Φ7 | PA66 | twinst | 26 | hydrophobic | 60 | IP67 | hole circle 7mm polygon | W | white | Φ7 | download spec. | ||
plastic vent installation by direct insert | 177 | LD-FNZ-26WB67/Φ7 | PA66 | insert | 26 | hydrophobic | 60 | IP67 | hole diameter7circle | W | white | Φ7 | download spec. | ||
plastic vent installation by plug | 178 | LD-FSS-130H67Φ12.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 179 | LD-FSS-130H67Φ10.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 180 | LD-FSS-130H67Φ9.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by cap | 181 | LD-FSU-130H67/Φ8.5 | PU | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 182 | LD-FSS-130H67/Φ8.5 | TPV | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 183 | LD-FAM-22WHD7/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by cap | 184 | LD-FAM-22WH67/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by hand | 185 | LD-FNL-27WB67/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | Diameter12circle | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 186 | LD-FNL-26WHD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 11 on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 187 | LD-FNL-26WBD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10 on the edge haxagon | W | white | M5*0.8 | download spec. |
HUIZHOU LEADER ELECTRONIC SCIENCE&TECHNOLOGY CO., LTD.
Service Hotline:400-080-1865
TEL:0752-2601855
FAX:0752-2601865
E-mail:sales@hzlede.com
Address:No. 180 Shenwu Group, Fourth Ring South Road, Henan Bank, Huicheng District, Huizhou
Copyright © ALL RIGHTS RESERVED HUIZHOU LEADER ELECTRONIC SCIENCE&TECHNOLOGY CO., LTD. 粤ICP备15115233号 www.hzlede.com www.300.cn