PRODUCTS
-
Ventilated membrane
-
Waterproof and breathable valve
-
Plasctic vent assembled by sleeve
-
plasctic vent assembled by hand
-
Plasctic vent assembled by Buckle
-
Plastic vents assembed by twist
-
Plastic vent assembled by rubber
-
Plastic vent assembled by insert
-
Plastic vent assembled by direct insert
-
Metal vent by sleeve
-
Metal vent assmebled by screw-driver
-
Metal vent assmebled by sleeve
-
-
Sound Transparent membrane
-
Special function waterproof and breathable valve
-
Accessory
Buckle type ventilation vent, known as air respirator, commonly. this product uses the ePTFE membrane material which joint development with our partners .the shell use PA66+20% fiberglass material injection molding, high temperature resistant silica gel coat O ring. The membrane material and the shell are combined together through the tight binding process, which has the advantages of stable performance, simple installation, long service time, high waterproof permeability and high performance.
Product features:
Integral molding to achieve a good waterproof performance
Quick to recover ventilation after leave the liquid surface
Cover and body interference fit to solve the problem of the lid off.
The cover is thin, thick body to avoid the risk of the lid off the when sleeve on force even broken pillars. Groove design to ensure that the O type ring does not overflow
Major benefits:
·Dust and waterproof performance up to IP68
·keep the pressure balance, avoid gas expansion to attack the shell ,prolong the life.
·maintain moisture balance, discharge moisture, relieve fogging and condensation inside the shell shell parts, extend component life
·To prevent the the electronic corrosion caused by salt and water , the protection of sensitive electronic, inductive products
·Reduce the cost of R & D, and reduce the difficulty of the research and development.
·Reduce the production cost and reduce the production difficulty.
·Reduce the cost of maintenance and repair
·Waterproof and dust hydrophobic
·Do not accumulate dust, do not water, do not form a dust cake, to maintain a smooth flow
·Anti ultraviolet, long life
·Wide operating temperature range
·Easy installation and convenient maintenance.
·At the same time, high quality flat mat, long life, no fracture, fatigue resistance.
·safe non-toxic, no thorns
·Greatly reduce the after sales failure rate, reduce the project cost, solve the enterprise to worry.
Installation guide
Iinstallation location
The location of the installation hole is preferred to choose the side vertical to the ground to assemble the vents, followed by the installation of the bottom, avoid easily by rain, dust and other objects covered. In order to avoid blocking microporous of membrane .
Installed with the size drawing, right side
150N pressure perpendicular to the vent cover
Ensure that the mounting surface is clean, no grease, particles and other pollutants. If necessary,ISO acohol can be used to clean the surface of the installation . To ensure that the surface is dry before installation.
Storage requirements
1.Avoid direct sunlight, avoid close to the heat source, avoid dust
2.Storage time is not more than 1 years
3.Production of excess products in the original packaging
4.When changing the packing, we should pay attention to protect the product teeth.
series | NO. | PART NO. | meterial | installation method | membrane model | characteristic | ventilation volumn | IP LEVEL | shape | cover | color | thread length | installation connector | charateristic | specification |
vent | ml/min@ 70mbar |
mm | mm | ||||||||||||
plastic vent installation by sleeve | 1 | LD-FNL-26MHD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Black | M12*1.25 | download spec. | ||
2 | plastic vent installation by sleeve | brass | thread | 26 | hydrophobic | 6250 | IP67 | 44on the edge haxagon | W | white | M40*1.5 | download spec. | |||
plastic vent installation by sleeve | 3 | LD-FNL-260L67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 4 | LD-FNL-260H67/G1/4 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 5 | LD-FNL-210H67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
metal vent installation by sleeve | 6 | LD-FCL-27WB67M4×0.7 | brass | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 7 | LD-FCL-27WBD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 8 | LD-FGL-27WHD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 9 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 10 | LD-FCL-26WB67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 11 | LD-FVL-26WV67/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
plastic vent installation by twist | 12 | LD-FNK-250L67/M10 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ10.0 | download spec. | ||
plastic vent installation by twist | 13 | LD-FNK-250L67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ6.4 | download spec. | ||
plastic vent installation by twist | 14 | LD-FNK-250H67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Black | Φ6.4 | download spec. | ||
plastic vent installation by direct insert | 15 | LD-FNN-26WB67/Φ7 | PA66 | twinst | 26 | hydrophobic | 60 | IP67 | hole circle 7mm polygon | W | white | Φ7 | download spec. | ||
plastic vent installation by direct insert | 16 | LD-FNZ-26WB67/Φ7 | PA66 | insert | 26 | hydrophobic | 60 | IP67 | hole diameter7circle | W | white | Φ7 | download spec. | ||
plastic vent installation by plug | 17 | LD-FSS-130H67Φ12.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 18 | LD-FSS-130H67Φ10.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 19 | LD-FSS-130H67Φ9.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by cap | 20 | LD-FSU-130H67/Φ8.5 | PU | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 21 | LD-FSS-130H67/Φ8.5 | TPV | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 22 | LD-FAM-22WH67/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by hand | 23 | LD-FNL-27WB67/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | Diameter12circle | W | white | M5*0.8 | download spec. | ||
plastic vent installation by cap | 24 | LD-FAM-22WHD7/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by sleeve | 25 | LD-FNL-26WHD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 11 on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 26 | LD-FNL-26WBD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10 on the edge haxagon | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 27 | LD-FNL-26WHC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 28 | LD-FNL-26WBC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 29 | LD-FNL-21WHD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 30 | LD-FNL-21WBD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 31 | LD-FNL-21WHZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 32 | LD-FNL-21WBZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 33 | LD-FNL-26MLD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Gray | M12*1.25 | download spec. | ||
plastic vent installation by sleeve | 34 | LD-FNL-260L67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 35 | LD-FNL-260H67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 36 | LD-FNL-260H67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 37 | LD-FNL-210L67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 38 | LD-FNL-210L67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 39 | LD-FNL-210L67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 40 | LD-FNL-210H67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 41 | LD-FNL-210H67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
metal vent installation byhand | 42 | LD-FCL-27WB67-N/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter18circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 43 | LD-FGL-22WG67M4×0.7 | stell | thread | 22 | hydrophobic | 70 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 44 | LD-FCL-27WG67M4×0.7 | stell | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 45 | LD-FGL-27WGD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 46 | LD-FCL-27WCD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | brass natral color | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 47 | LD-FCL-27WBD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 48 | LD-FCL-27WHD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 49 | LD-FCL-27WBD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 50 | LD-FGL-27WBD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 51 | LD-FGL-27WHD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 52 | LD-FGL-27WGD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 53 | LD-FCL-27WBD7/M12*1.0 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.0 | download spec. | ||
metal vent installation by sleeve | 54 | LD-FCL-27WBD7/M12*1.25 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 55 | LD-FCL-27WB67/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 56 | LD-FCL-27WHD7/M12X1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.75 | |||
metal vent installation by sleeve | 57 | LD-FCL-22WBD7/M12X1.75 | brass | thread | 22 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | |||
metal vent installation by sleeve | 58 | LD-FCL-27WB67/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 59 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 60 | LD-FGL-26WBD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. |
series | NO. | PART NO. | meterial | installation method | membrane model | characteristic | ventilation volumn | IP LEVEL | shape | cover | color | thread length | installation connector | charateristic | specification |
vent | ml/min@ 70mbar |
mm | mm | ||||||||||||
metal vent installation by sleeve | 61 | LD-FGL-26WGD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 62 | LD-FCL-26WBD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | white | download spec. | ||
metal vent installation by sleeve | 63 | LD-FCL-26WB67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 64 | LD-FCL-26WHD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 65 | LD-FCL-26WH67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 66 | LD-FCL-26WHD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 67 | LD-FCL-26WH67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 68 | LD-FCL-26WBD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 69 | LD-FVL-26WVD7/M10*1.0 | Al | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | Al natural color | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 70 | LD-FCL-26WBD7/M10*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.25 | download spec. | ||
metal vent installation by sleeve | 71 | LD-FCL-26WB67/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 72 | LD-FCL-26WBD7/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 73 | LD-FCL-33WBD7/M12*1.5 | brass | thread | 33 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 74 | LD-FCL-26WHD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 75 | LD-FGL-26WBD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 76 | LD-FGL-26WHD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 77 | LD-FGL-26WGD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 78 | LD-FCL-26WBD7/M12*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 79 | LD-FCL-26WBD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 80 | LD-FCL-26WHD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 81 | LD-FCL-26WBD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 82 | LD-FCL-26WB67/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 83 | LD-FCL-26WB67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 84 | LD-FCL-26WH67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 85 | LD-FCL-26WCD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 86 | LD-FCL-26WC67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 87 | LD-FVL-26WVD7/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 88 | LD-FVL-96WV65/M12*1.5 | Al | thread | 96 | hydrophobic | 6300 | IP65 | 17on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 89 | LD-FCL-26WBZ7/M16*2.0 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*2.0 | download spec. | ||
metal vent installation by sleeve | 90 | LD-FCL-26WCZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | brass natral color | M16*1.5 | download spec. | ||
metal vent installation by sleeve | 91 | LD-FCL-26WBZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 92 | LD-FNL-26WHC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 93 | LD-FNL-26WBC7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 94 | LD-FNL-21WHD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 95 | LD-FNL-21WBD7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 96 | LD-FNL-21WHZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | Black | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 97 | LD-FNL-21WBZ7/M10*1.0 | PA66 | thread | 22 | hydrophobic | 1820 | IP67 | 16on the edge haxagon | 0 | white | M10*1.0 | download spec. | ||
plastic vent installation by sleeve | 98 | LD-FNL-26MLD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Gray | M12*1.25 | download spec. | ||
plastic vent installation by sleeve | 99 | LD-FNL-26MHD7/M12*1.25 | PA66 | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | M | Black | M12*1.25 | download spec. | ||
100 | plastic vent installation by sleeve | brass | thread | 26 | hydrophobic | 6250 | IP67 | 44on the edge haxagon | W | white | M40*1.5 | download spec. | |||
plastic vent installation by sleeve | 101 | LD-FNL-260L67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 102 | LD-FNL-260L67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 103 | LD-FNL-260H67/G1/4 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 104 | LD-FNL-260H67/M16*1.5 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 105 | LD-FNL-260H67/M16*2.0 | PA66 | thread | 26 | hydrophobic | 748 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 106 | LD-FNL-210L67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 107 | LD-FNL-210L67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 108 | LD-FNL-210L67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Gray | M16*2.0 | download spec. | ||
plastic vent installation by sleeve | 109 | LD-FNL-210H67/G1/4 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | G1/4-19 | download spec. | ||
plastic vent installation by sleeve | 110 | LD-FNL-210H67/M16*1.5 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*1.5 | download spec. | ||
plastic vent installation by sleeve | 111 | LD-FNL-210H67/M16*2.0 | PA66 | thread | 21 | hydrophobic | 2400 | IP67 | 19on the edge haxagon | 0 | Black | M16*2.0 | download spec. | ||
metal vent installation byhand | 112 | LD-FCL-27WB67-N/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter18circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 113 | LD-FGL-22WG67M4×0.7 | stell | thread | 22 | hydrophobic | 70 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 114 | LD-FCL-27WB67M4×0.7 | brass | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 115 | LD-FCL-27WG67M4×0.7 | stell | thread | 26 | hydrophobic | 40 | IP67 | Diameter8circle | W | white | M4*0.7 | download spec. | ||
metal vent installation by sleeve | 116 | LD-FCL-27WBD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 117 | LD-FGL-27WHD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 118 | LD-FGL-27WGD7-8/M5*0.8 | stell | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 119 | LD-FCL-27WCD7-8/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter8circle | W | brass natral color | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 120 | LD-FCL-27WBD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 121 | LD-FCL-27WHD7-11/M5*0.8 | brass | thread | 27 | hydrophobic | 60 | IP67 | Diameter11circle | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 122 | LD-FCL-27WBD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 123 | LD-FGL-27WBD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 124 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 125 | LD-FGL-27WHD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 126 | LD-FGL-27WGD7/M12*1.5 | stell | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 127 | LD-FCL-27WBD7/M12*1.0 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.0 | download spec. | ||
metal vent installation by sleeve | 128 | LD-FCL-27WBD7/M12*1.25 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 129 | LD-FCL-27WB67/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 130 | LD-FCL-27WHD7/M12X1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.75 | |||
metal vent installation by sleeve | 131 | LD-FCL-22WBD7/M12X1.75 | brass | thread | 22 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | |||
metal vent installation by sleeve | 132 | LD-FCL-27WB67/M12*1.75 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 133 | LD-FCL-27WHD7/M12*1.5 | brass | thread | 27 | hydrophobic | 260 | IP67 | Diameter16circle | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 134 | LD-FGL-26WBD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 135 | LD-FGL-26WGD7/M5*0.8 | stell | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Character | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 136 | LD-FCL-26WBD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | white | download spec. | ||
metal vent installation by sleeve | 137 | LD-FCL-26WB67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | white | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 138 | LD-FCL-26WHD7/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 139 | LD-FCL-26WH67/M5*0.8 | brass | thread | 26 | hydrophobic | 60 | IP67 | 10on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
metal vent installation by sleeve | 140 | LD-FCL-26WHD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 141 | LD-FCL-26WHD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 142 | LD-FCL-26WH67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | Black | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 143 | LD-FCL-26WB67/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 144 | LD-FCL-26WBD7/M8*1.0 | brass | thread | 26 | hydrophobic | 60 | IP67 | 12on the edge haxagon | W | white | M8*1.0 | download spec. | ||
metal vent installation by sleeve | 145 | LD-FVL-26WVD7/M10*1.0 | Al | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | Al natural color | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 146 | LD-FCL-26WBD7/M10*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.25 | download spec. | ||
metal vent installation by sleeve | 147 | LD-FCL-26WB67/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 148 | LD-FCL-26WBD7/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 149 | LD-FCL-26WBD7/M10*1.0 | brass | thread | 26 | hydrophobic | 260 | IP67 | 14on the edge haxagon | W | white | M10*1.0 | download spec. | ||
metal vent installation by sleeve | 150 | LD-FCL-33WBD7/M12*1.5 | brass | thread | 33 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 151 | LD-FCL-26WHD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 152 | LD-FGL-26WBD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 153 | LD-FGL-26WHD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 154 | LD-FGL-26WGD7/M12*1.5 | stell | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 155 | LD-FCL-26WBD7/M12*1.25 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.25 | download spec. | ||
metal vent installation by sleeve | 156 | LD-FCL-26WBD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 157 | LD-FCL-26WHD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 158 | LD-FCL-26WBD7/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 159 | LD-FCL-26WB67/M12*1.75 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.75 | download spec. | ||
metal vent installation by sleeve | 160 | LD-FCL-26WB67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | white | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 161 | LD-FCL-26WH67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Black | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 162 | LD-FCL-26WCD7/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 163 | LD-FCL-26WC67/M12*1.5 | brass | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | brass natral color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 164 | LD-FVL-26WV67/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 165 | LD-FVL-26WVD7/M12*1.5 | Al | thread | 26 | hydrophobic | 260 | IP67 | 16on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 166 | LD-FVL-96WV65/M12*1.5 | Al | thread | 96 | hydrophobic | 6300 | IP65 | 17on the edge haxagon | W | Al natural color | M12*1.5 | download spec. | ||
metal vent installation by sleeve | 167 | LD-FCL-26WBZ7/M16*2.0 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*2.0 | download spec. | ||
metal vent installation by sleeve | 168 | LD-FCL-26WCZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | brass natral color | M16*1.5 | download spec. | ||
metal vent installation by sleeve | 169 | LD-FCL-26WBZ7/M16*1.5 | brass | thread | 26 | hydrophobic | 1375 | IP67 | 20on the edge haxagon | W | white | M16*1.5 | download spec. | ||
metal vent installation by sleeve | 170 | LD-FCL-26WBZ7/M20*1.5 | brass | thread | 26 | hydrophobic | 2150 | IP67 | 22on the edge haxagon | W | white | M20*1.5 | download spec. | ||
metal vent installation by sleeve | 171 | LD-FCL-26WBZ7/M32*1.5 | brass | thread | 26 | hydrophobic | 6250 | IP67 | 36on the edge haxagon | W | white | M32*1.5 | download spec. | ||
metal vent installation by sleeve | 172 | LD-FCL-26WBD7/M40*1.5 | brass | thread | 26 | hydrophobic | 8250 | IP67 | 44on the edge haxagon | W | white | M40*1.5 | download spec. | ||
plastic vent installation by twist | 173 | LD-FNK-250L67/M10 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ10.0 | download spec. | ||
plastic vent installation by twist | 174 | LD-FNK-250L67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Gray | Φ6.4 | download spec. | ||
plastic vent installation by twist | 175 | LD-FNK-250H67/Φ6.4 | PA66 | buckle | 25 | hydrophobic | 260 | IP67 | 16on the edge haxagon | 0 | Black | Φ6.4 | download spec. | ||
plastic vent installation by direct insert | 176 | LD-FNN-26WB67/Φ7 | PA66 | twinst | 26 | hydrophobic | 60 | IP67 | hole circle 7mm polygon | W | white | Φ7 | download spec. | ||
plastic vent installation by direct insert | 177 | LD-FNZ-26WB67/Φ7 | PA66 | insert | 26 | hydrophobic | 60 | IP67 | hole diameter7circle | W | white | Φ7 | download spec. | ||
plastic vent installation by plug | 178 | LD-FSS-130H67Φ12.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 179 | LD-FSS-130H67Φ10.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by plug | 180 | LD-FSS-130H67Φ9.0 | TPV | plug | 13 | hydrophobic | 60 | IP67 | |||||||
plastic vent installation by cap | 181 | LD-FSU-130H67/Φ8.5 | PU | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 182 | LD-FSS-130H67/Φ8.5 | TPV | plug | 13 | hydrophobic | 60 | IP67 | hole diameter8.5circle | W | Black | Φ8.5 | download spec. | ||
plastic vent installation by cap | 183 | LD-FAM-22WHD7/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by cap | 184 | LD-FAM-22WH67/Φ8 | PA66 | Cap | 22 | hydrophobic | 836 | IP67 | hole diameter8circle | W | Black | Φ8 | download spec. | ||
plastic vent installation by hand | 185 | LD-FNL-27WB67/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | Diameter12circle | W | white | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 186 | LD-FNL-26WHD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 11 on the edge haxagon | W | Black | M5*0.8 | download spec. | ||
plastic vent installation by sleeve | 187 | LD-FNL-26WBD7/M5*0.8 | PA66 | thread | 26 | hydrophobic | 60 | IP67 | 10 on the edge haxagon | W | white | M5*0.8 | download spec. |
HUIZHOU LEADER ELECTRONIC SCIENCE&TECHNOLOGY CO., LTD.
Service Hotline:400-080-1865
TEL:0752-2601855
FAX:0752-2601865
E-mail:sales@hzlede.com
Address:No. 180 Shenwu Group, Fourth Ring South Road, Henan Bank, Huicheng District, Huizhou
Copyright © ALL RIGHTS RESERVED HUIZHOU LEADER ELECTRONIC SCIENCE&TECHNOLOGY CO., LTD. 粤ICP备15115233号 www.hzlede.com www.300.cn